Author Topic: Öryggisreglur NHRA/FIA 2011  (Read 8523 times)

Offline 1965 Chevy II

  • On the bumper looking at god
  • *******
  • Posts: 8.089
  • Friðrik Daníelss.
    • View Profile
Öryggisreglur NHRA/FIA 2011
« on: July 12, 2011, 18:01:07 »
Við hvetjum keppendur til að kynna sér þetta vel:
http://www.kvartmila.is/is/sidur/adalreglur
.....and 500 pounds of torque......what ever that is.
1.30 60ft 5.78 @ 119.9mph 1/8 - 9.07 @ 148.2 mph N/A Pump gas

Offline Kiddi

  • TÚRBÓ
  • Doing 20ft wheelies
  • ******
  • Posts: 2.762
    • View Profile
Re: Öryggisreglur NHRA/FIA 2011
« Reply #1 on: July 13, 2011, 01:05:24 »
Takk kærlega!

Munið félagar, þetta eru lágmarkskröfur og líf ykkar er í húfi þegar á reynir :neutral:
8.93/154 @ 3650 lbs.

Offline Lolli DSM

  • In the burnout box
  • ***
  • Posts: 176
    • View Profile
Re: Öryggisreglur NHRA/FIA 2011
« Reply #2 on: July 13, 2011, 02:36:39 »
Hvernig er það, ætla allir að fara að smíða belly pan eða nota engine diaper?
Þórður Birgisson a.k.a. Lolli

Mitsubishi Eclipse GSX 1990

9.65@148mph Best trap 150mph! Ethanol + Avgas blanda 50%
10.65@129.6 á 100oct dælubensín

Offline baldur

  • Administrator
  • Staged and NOS activated
  • *****
  • Posts: 2.464
    • View Profile
    • http://foo.is
Re: Öryggisreglur NHRA/FIA 2011
« Reply #3 on: July 13, 2011, 07:42:52 »
Bleyja er amk búnaður sem ég myndi aldrei vilja sjá í götubíl :???:
Baldur Gíslason

1995 Mitsubishi Eclipse GSX 4x4 turbo
1992 Polaris Indy RXL 136" turbo

Turbo or no go.

Offline 1965 Chevy II

  • On the bumper looking at god
  • *******
  • Posts: 8.089
  • Friðrik Daníelss.
    • View Profile
Re: Öryggisreglur NHRA/FIA 2011
« Reply #4 on: July 13, 2011, 12:54:25 »
1.2 og 3 er að hafa veltibúrin, gallana, hjálmana, beltin, öxla, felgubolta/stödda, sprengihlífar og drifskafts baulur í lagi, svona þessi stóru öryggisatriði.
.....and 500 pounds of torque......what ever that is.
1.30 60ft 5.78 @ 119.9mph 1/8 - 9.07 @ 148.2 mph N/A Pump gas

Offline maggifinn

  • Staged and NOS activated
  • *****
  • Posts: 1.291
    • View Profile
Re: Öryggisreglur NHRA/FIA 2011
« Reply #5 on: July 19, 2011, 21:10:15 »
Hvernig er það, ætla allir að fara að smíða belly pan eða nota engine diaper?

LOWER ENGINE CONTAINMENT DEVICE
In classes where specified, which must utilize an FIA-accepted lower engine oil retention device, a belly pan may be used in lieu of a device attached to the engine

When required, an SFI Spec 7.1 or 7.2 Lower Engine Containment Device must cover the sides of the block and pan up to within one inch (25.4 mm) of the head mating surface and extend to within 1 1/2 inches (38.1 mm) of the front and rear of the cylinder case area.

 Þessar línur "Where Specified" og "when required" setja þessar kröfur algjörlega í hendur keppnishaldara.